Vapcell S4 Plus/Fast charger/Charge current 3A. NEW Version 2.0

Charge CURRENT 3 Amps per channel!
Charges batteries:
Ni-Mh and Ni-Cd: AAAA, AAA, AA, C (R14), SC
Li-Ion (IMR, INR, ICR) with and without protection: 18650*********18490, 18350********17500,
16340 (rcr123a), 10440, 20700, 21700, 266*******50, 26500 and other formats.
Charge current:
Ni-Mh/Ni-Cd: 250mA x 4, 500 mA x 4, 1000 mA x 4;
Li-ion: 250mA x 4, 500 mA x 4, 1000 mA x 4; 1500 mA x 4, 2000 mA x 4, 2500 mA x 4, 3000 mA x 4.
High charging currents of 2A, 2.5A and 3A are available for all four batteries at once.

Description

• Four completely independent channels for charging batteries
• Supports Li-ion 4.2V (IMR/INR/ICR), Ni-MH, Ni-Cd batteries
• Each slot has a thermal sensor to measure cell temperature
• Use of batteries up to 75mm long (including with a protection board)
• Supports low capacity batteries
• Charging method for Li-ion batteries: charge with constant current (CC) and constant voltage (CV)
• Automatic detection of the end of charging process by voltage drop (-dV) for Ni-Cd / Ni-Mh batteries
• Automatic and manual selection of operating modes
• Setting the optimal charge current in automatic mode based on an analysis of the internal resistance of the batteries
• Fast charge Li-ion / IMR batteries (up to 3A per channel)
• Adjustable charge current:
Li-ion: 0.25A / 0.5A / 1.0A / 1.5A / 2.0A / 2.5A / 3.0A
Ni-Cd / Ni-Mh: 0.25A / 0.5A / 1.0A
• Adjustable discharge current: 0.25A / 0.5A / 1.0A (1A in slot 1 and 4)
• DISCHARGE mode to eliminate the “memory effect” and measure residual capacity
• TEST mode for measuring real capacitance
• RESTORATION/REPAIR mode for raising the voltage of over-discharged Li-ion batteries and restoring the capacity of Ni-Cd / Ni-Mh batteries
• Determination of internal battery resistance
• Activation of protected Li-ion batteries
• Display with switchable backlight
• Display information about battery type, charging time, charging current, capacity, voltage, internal resistance, charge percentage and battery temperature

Technical parameters of the device

Input: 12V DC, 5A
Charging current range 250~3000mA
Discharge current range 250~1000mA
Device weight: 330g.
Device size (L x W x H): 115 x 170 x 40mm.

Features of the Vapcell S4 Plus charger

Versatility

The Vapcell S4 Plus charger can charge more than 20 types of different formats of cylindrical batteries. One Vapcell S4 charger can replace several chargers, which significantly saves your budget.

Rich functionality

Vapcell S4 contains all the functions necessary for a modern charger. Using this model, you can not only charge, but also discharge, test and restore batteries, as well as measure internal resistance and activate deeply discharged Li-Ion batteries.

Large information display with backlight

The Vapcell S4 v 2 charger is equipped with a large contrast display with bright backlighting. This display shows all battery parameters in real time: battery type, operating mode, charge current, voltage, capacity, internal resistance, charge level, charge percentage, operating time, end of operating mode and temperature. Parameters are displayed for each battery individually)

Ability to charge 20700 and 21700 cells with protection

The Vapcell S4 Super charger can charge 20700 and 21700 format batteries, both with and without a protection board. This became possible thanks to the presence of extended slots for cells in Vapcell S4 - batteries with increased length can be placed in these slots without any problems.

12 month warranty.

Attention! The charger is supplied without batteries.